Inferno Secure Boot Qmobile Cs1 Format and Flash File Read Done

Inferno Secure Boot Qmobile Cs1 FRP and Flash File Read Done

Boot File Download Here

Qmobile X10 MTK 6572 Scatter file MT6572__QMobile__QMobile X10__X10__4.4.2__ALPS.KK1.MP7.V1

Qmobile X10 MTK 6572 Scatter file MT6572__QMobile__QMobile X10__X10__4.4.2__ALPS.KK1.MP7.V1

MT6572__QMobile__QMobile X10 

X10__4.4.2

ALPS.KK1.MP7.V1

DOWNLOAD

LINK

Download Link Here

How to Read/ Write/Format Qmobile i1 firmware

                                         HOW TO RESET USER LOCK QMOBILE I1 

                                        AND HOW TO READ FLASH OR WRITE FLASH QMOBILE i1 

                                        FIRST OPEN CM2SPD THEN 

                                        SELECT SPD 7731 IC THEN

                                        SELECT SERVICE AND FORMAT 

                                        PUSH VOLUME UP 

                                        AND INSERT CABLE 

                                        THANKS 

Password:iCfirmware

Please Click To Download File Here

Qmobile Black Two SPD7731 Android -6.0 OK

Qmobile Black Two SPD7731 Android -6.0 OK

SP7731CEA_Black_Two_6.0_QMobile_BlackTwo_MP_21_06_QMobile_Black_Two

Click Here For Download File

Q mobile K150 SPD 6531A Flash FIle Read By infinity Box CM2

Tested Boot Key boot key

press and hold menu key+* key

insert cable

FastCheck : SPD65xx

Load file...

Not found any ExtInfo data (Compressed already)

Load Ok

Operation : Flash [ v1.16 ]

======= Flash

Files set for flashing : 

[ MCU ] : SPD6531_00400000_GD25LQ32_en__1.0-k150.bin

1. Remove battery. Insert USB cable

2. Press and hold BootKey ( Skip, if use BootCable )

3. Insert battery

==== Wait for phone...

Phone found! [ 15 ]

Port Opened

Sync...

Initial Boot Failed!

Reconnect Power/Cable!

Operation : Flash [ v1.16 ]

======= Flash

Files set for flashing : 

[ MCU ] : SPD6531_00400000_GD25LQ32_en__1.0-k150.bin

1. Remove battery. Insert USB cable

2. Press and hold BootKey ( Skip, if use BootCable )

3. Insert battery

==== Wait for phone...

Phone found! [ 15 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending boot ... 

Boot Sent , starting...

Boot Ver : Spreadtrum Boot Block version 1.2

Boot Ok

CPU ID : 6531 , FDLStat : 0100

[0] Flash DIE : 00C8 0060 0016 0000

[0] Flash VEN : GigaDevice , GD25LQ32

[0] Flash CAP : 00400000

======= Flashing MCU

Mapping file ... 

Mapping done

Processing file : SPD6531_00400000_GD25LQ32_en__1.0-k150.bin

Init ok, send data

Flashing Done!

Info : In some cases after flash required make "Format Fs / Reset Phone"

Done!

Elapsed: 00:01:34

Reconnect Power/Cable!

Qmobile K150 File

File Download Link Here

Qmobile Z10 32gb Battery Consumption Flash file

Qmobile Z10 32gb Battery Consumption Flash file

Qmobile Z10_32+3 Battery Consumption

Download Official Factory Firmware

Download Free File

 How to install firmware?

–Browse the location of file and choose the “Scatter File” which is named as”MT65xxAndroid_scatter”
– Please wait while file is loaded in Flash tool or any other Box.
– Press “Download” button. Or Select “Firmware Upgrade” if you want to upgrade software.
– switch-off the phone, Remove it’s battery and replace it back.
– Hit the “Download” or “Firmware Upgrade” button.
– Plug-in the USB cable to phone to connect it to your PC.
– The process will be started, and Red, Purple & Yellow progress stripes will be shown.
– “Ok” Notification will be appeared on a green circle at the end of whole process.
– Plug it out from USB cable. And you can turn it on.

Password: z1032gbbyzohaib

Download Free File